Comments on: Store: Fork Fixture Kit Assembly Instructions

By: Alex Wetmore

Alex Wetmore — Tue, 16 Sep 2014 18:20:35 +0000

Sorry, I don”t have useful drawings to share that exactly match what came with the kit. The drawings were done directly in my CAM software (CamBam) and don”t have dimensions that can be pulled out and don”t really visually match the final part.

By: Jon Turner

Jon Turner — Tue, 16 Sep 2014 16:22:09 +0000

Hi, just wondering if you had any technical drawings of the machined pieces that could be taken to a local machine shop and cut? Most of the parts seem pretty easy to figure out and plan with a machinist, but if the drawings could be made available, that would make the process a little easier (I”m thinking particularly with the dummy axle holder). I wouldn”t even mind paying a few bucks for them if you weren”t willing to share them for free.

By: Tyler Cannon

Tyler Cannon — Mon, 14 Apr 2014 01:29:02 +0000

Hi Alex, I”m building a fork jig based on your design and I”m down to the last piece. The dummy axle holder. would you happen to have any left I could buy off you? I”m ready to assemble the jig and thought I would give you a shot. Thanks for any info or help. -Tyler.

By: Alex Wetmore

Alex Wetmore — Thu, 06 Mar 2014 18:05:40 +0000

Sorry, I”m not making any more fork fixture kits. You are welcome to use features of the design in making your own.

By: Fernando

Fernando — Mon, 27 Jan 2014 19:00:24 +0000

Hi there. I was thinking about making my own fixture and came across this site. Great info, thank you for sharing. Are these kits going to be available anytime soon?

Fernando

By: Jim

Jim — Sat, 14 Dec 2013 21:16:56 +0000

So, I''ve built a crappy fork Jig.. but would like to have an ok fork jig. The main issue that I have is that I''m improvising too much when it comes to holding the axle. I''ve been able to make everything else work with 8020 parts, but I don''t have any heavy machinery to make something like that at the moment. I know you''re not selling the kit anymore, but I figured I''d write to see if there was any chance that you had one of the axle holders still sitting around that you want to make some beer-money from. Thanks! Jim

By: Ed Watts

Ed Watts — Thu, 03 Jan 2013 20:12:11 +0000

Hi,

I saw your blog referred on the velocipede salon forum and was wondering if you could provide more details. Are you selling just the kit? Is it unassembled?

Do you have any experience with shipping to Toronto, Canada?

Thanks
-Ed Watts

By: Darron Coppin

Darron Coppin — Fri, 16 Nov 2012 21:37:55 +0000

Do you have any of your fork jig kits for sale .
Thanks

Darron

By: WTB Fork Fixture / Jig

WTB Fork Fixture / Jig — Sun, 14 Oct 2012 12:50:20 +0000

[...] [...]

By: Gerry Parkes

Gerry Parkes — Sun, 14 Oct 2012 02:37:49 +0000

Alex:

What is the cost of the kit?

Gerry Parkes